Practical Modeling of High Speed Channels Based on Datasheet Input

As Dave Dunham from Molex Corp. likes to say “When designing high speed serial links beyond 10 GB/s, everything matters“.  Part of that everything is accurate modeling of transmission line losses. It is important to model dielectric and conductor loss accurately.

Here is a very useful presentation with speaker notes on the topic of “Practical Modeling of High Speed Channels Based on Datasheet Input” presented by Bert Simonovich, Lamsim Enterprise Inc at EDICON 2017.

Here is the motivation of the methodology proposed:

As my friend Eric Bogatin often likes to say, Sometimes an OK answer NOW! is better than a good answer late.” As a high-speed signal integrity practitioner and backplane architect, I often have to come up with an answer sooner, rather than later because of the impact to time and cost to my clients. And that’s why I have been motivated over the last few years to research and develop a simple methodology to accurately determine parameters to feed into modern EDA tools .

Happy Designing…..!!!

Anurag Bhargava

Practical_Modeling_of_High-speed_Channels_Based_on_Data_Sheet_Input_Annotated_Oct3-2017

 

Advertisements

Keysight EEsof India Design Forum 2017

It is my pleasure to invite you to attend Keysight EEsof India Design Forum 2017 to be held at Hyderabad, Bangalore and Ahmedabad on 24th Oct, 26th Oct and 28th Oct 2017 respectively.

Seminar is complimentary but early registration is advised to secure your participation.

You can register for the location of your choice: Register Now

Download the detailed e-invite from here: Design Forum 2017 e-invite

Hope to see you at one of the locations….

 

 

Workshop on High Speed Signal Integrity

I would be conducting a day-long, hands-on workshop on High Speed Signal Integrity design at Keysight Technologies, Bangalore office. First session is scheduled on 17th August 2017.

This workshop is complimentary but requires prior registration to receive a formal invite.

Workshop Agenda:

Pre Layout SI

  • Designing VIAs for optimum High Speed performance
  • Controlled Impedance Line Design
  • Channel Simulation Basics
  • High Speed Serial Link Simulation
  • Batch Simulation
  • IBIS-AMI Simulation
  • Eye Optimization

Post Layout SI

  • BRD/ODB++ Layout Import in ADS
  • Post Layout SI Simulation with SIPro
  • Channel Simulation with Post Layout Data

If you are interested to attend the same, you can drop a mail with your complete contact details at “anurag_bhargava@keysight.com” or leave your details in the comment box….

Happy Designing…!!!

P.S. If we are not able to accommodate you for the 1st session due to capacity limit or you are not able to make it due to other engagements then we will surely accommodate you in one the future  sessions which are likely to happen shortly.

Thermal Effects, Power Integrity and Your PCB

Keysight Technologies has scheduled a free 1-hour webcast on Thermal Analysis of the PCB and its impact on Power Integrity performance.

WHY THIS WEBCAST IS IMPORTANT

Did you know that in addition to validating the electrical performance of the power integrity on your PCB, it is also crucial to perform a thermal validation as well? This webcast introduces the thermal aspects of power integrity in your PCB designs and why it is critical to consider them. To better understand a design’s power integrity from the thermal viewpoint, it provides a theoretical background for heat transfer and overview of the thermal analysis technologies. Finally, the webcast demonstrates the importance of performing thermal analysis on PCB designs by showing a practical PCB design example.

Date: 27th July 2017

Time: 01.00pm Eastern Daylight Time (10.30pm India Time)

Register Now

Webinar Recording Available: Solve your SI & PI challenges using Keysight EEsof EDA Tools

Video recording of my webinar on “Solving your SI & PI challenges” scheduled on 6th April 2017 is now available at my YouTube channel now. Look forward for your comments & suggestions……

You can view the recording here:

For more information:

  1. http://www.keysight.com/find/eesof-ads
  2. http://www.keysight.com/find/eesof-ads-sipro
  3. http://www.keysight.com/find/eesof-ads-pipro

Webinar: Solve your Signal & Power Challenges using SIPro & PIPro

I will be conducting this Webinar on 6th April at 11.00am – 12.30pm (IST). Look forward for your participation.


Keysight Technologies is offering free webinar on 6th April 2017, specifically designed for Signal and Power Integrity Engineers trying to accurately model their printed circuit boards (PCBs), a task that is now more challenging given today’s ever increasing data rates. During the webinar, attendees will learn about SIPro (Signal Integrity Professional) and PIPro (Power Integrity Professional) tools from Keysight Technologies.

SIPro and PIPro provide a cohesive workflow within ADS for signal integrity and power integrity applications in high speed digital board design. Specific use cases will be demonstrated, which will reveal the powerful capabilities of SIPro & PIPro.

Topics to be covered:

– Challenges of increasing speeds & complexity

– Why you need a Channel Simulator

– S Parameters for frequency and time domain data mining

– EM simulation for Signal integrity

– Fast parallel bus DDR4 simulations

– How to Analyze 100 GbE – KP PAM4 vs NRZ

– Power Integrity basics

– Power Integrity IR Drop

Location: At Your PC

How to Register:

Send a mail to tm_india@keysight.com or dial toll free number to register: 1800-11-2626